How do you tie down a motorcycle with a wheel chock

On the lookout for a bike is definitely an infinite funding, so it’s solely becoming to be sure that your treasured journey is secure and safe when transporting it.

Nonetheless doing isn’t as easy on account of it sounds. In exact reality, it is important to ponder numerous factors earlier than making the change to make it attainable for there isn’t a room for pricey errors.

How do you tie down a motorcycle with a wheel chock

Is it doable to tie down a bike and by no means using a chock?

There have been divided opinions about tying down a bike on a trailer with out utilizing a chock.

Some would say it’s okay so long as you tie the bike as securely as doable and inside the event you’re solely transporting it on a brief distance.

Nonetheless tying down a bike with out utilizing a wheel chock leaves the possibility of the doorway wheel turning and your complete bike shifting whereas being transported.

That could possibly be very true inside the event you’re touring on a tough freeway the place bumps could make the wheels unstable.

So, within the occasion you wish to transport your bike as safely as doable, it’s largest to make the most of a wheel chock to safe the wheels all by way of your journey.

Everytime you don’t have the worth range for a metallic wheel chock, you most likely can at all times make one from picket or one other sturdy provides.

How do it is essential to tie down a bike precisely?

Aside from a wonderful wheel chock, you furthermore want a ratchet strap to safe your bike precisely following these steps:

1. Put the wheel chock in route of the doorway finish of your trailer earlier than loading the bike utilizing a ramp. As rapidly as a result of the bike is on the trailer, push the doorway wheel in route of the chock to maintain up it from shifting.

2. Begin by wrapping delicate loops all through the underside of each the left and proper handlebars. Tender loops defend your bike within the path of the hooks of the ratchet straps that may set off scratches. You might also use delicate hooks in your ratchet straps to maintain up your bike secure.

3. Hook one finish of your ratchet strap on the left and proper handlebars of your bike and the choice finish onto a safe diploma in your trailer.

4. Tighten your ratchet straps gently to safe the bike. Make it attainable for every finish is pulled tight ample to maintain up the bike standing upright with the assistance of the straps.

5. Search for a sturdy space on every side of your bike’s rear finish just like the physique to safe your ratchet straps. Don’t neglect to make the most of delicate loops to guard your bike from scratches.

Alter to the equal methodology in attaching and tightening your ratchet straps behind your bike. Merely make sure you pull the slack out of your straps to make them as tight and safe as doable.

6. For added safety and to be sure that your bike’s rear finish doesn’t bounce spherical all by way of transport, you’ll do a second tie-down working all through the anchor diploma on the mattress and all through the rear wheel.

This may increasingly more and more defend the bike from shifting when you’re on the freeway.

7. As rapidly as all the points is in place, double-check every of the 4 ratchet straps to be sure that all the points is tightly in place and nothing turned free on the tactic of tying down your bike.

It’s furthermore good to do a take a look at drive on a brief distance merely to see in case your bike will preserve in place and nothing will change when the trailer is in movement.

When tying down your bike, guarantee to spend money on good high quality ratchet straps, delicate loops, and a wheel chock to maintain up all the points in place and defend your bike from any damages all by way of transport.

In any case, you invested some massive cash in your journey, so it’s solely becoming that you just merely furthermore spend money on the right units to maintain up it secure and safe everytime you’re transporting it on a trailer.

Remaining Up to date: January 20th, 2021

Occasionally, with the pliability to tie down your avenue bike could current useful. By the use of the years, there have been loopy makes an attempt to safe bikes starting from rope to twine and to even zip ties. This text goes to look to stipulate the simplest alternatives for securing your bike for secure transport.

First, we advocate you may want the following objects at your disposal:

  • Entrance Wheel Chock (qty 1)
  • Excessive High quality, Excessive Energy Ratchet Straps (qty 4)
  • Excessive High quality Tender Loops (qty 4)
  • OPTIONAL FOR SPORT BIKES: Canyon Dancer Bar Straps replaces two of the delicate loops for sport bikes
  • OPTIONAL FOR SECURING REAR WHEEL: Tyre Down Wheel Strapping System.

NOTE: Some bikes might have attachment parts (just like the ST1300) whereas completely totally different producers DO NOT RECOMMEND utilizing your handlebars for tie down parts as they are going to bend; please search the advice of your proprietor’s handbook earlier than persevering with.

Subsequent, after loading your bike and positioning your bike’s entrance wheel into the chock stand, use the delicate loops (most sport bikes can use the Canyon Dancer) by wrapping a fragile loop spherical a location of excellent structural integrity on the doorway of the bike (as a remaining resort, the underside of the left handlebar and triple clamp might go) and place the hook finish of 1 strap by way of the delicate loop. Tender loops stop the scratching of your vehicle with any arduous elements from the ratchet strap. Be a part of one finish of the delicate loop to the ratchet strap. Be a part of the choice finish of the ratchet strap to a safe spot in your truck or trailer(ideally on an angle). Then pull the slack out of the strap and ratchet it quite a few instances. Repeat this course of for the RIGHT side of the bike.

Then, as rapidly as each ratchet straps are in place, ratchet every strap till the bike is vertical and may preserve snugly in place.

Make sure the suspension is partially compressed when ratcheting the straps. A motorcycle that’s not safe will change all by way of transport, and in a worse case state of affairs, fall off the trailer or out of the mattress of your pickup.

Protected the rear finish of your bike. Uncover a gradual a part of the left rear of the bike and wrap a fragile loop spherical it (keep away from utilizing rear foot peg attachments as they typically aren’t designed for the flexibility created when strapping down the auto). Then proceed to safe the straps to the bike in equal mannequin as accomplished all through the doorway. Every bike is only a bit completely completely totally different so there isn’t one single spot to wrap the delicate loop that’s the equal for each bike, merely make sure that it is not a part that could possibly be merely bent or damaged. The rear tie-downs are used to cease the as soon as extra wheel of the bike from shifting sideways on account of the trailer goes over bumps. Ensuing from this reality they don’t should be as tight on account of the doorway straps.

One different various for strapping down the rear of the bike stands out as a result of the Tyre Down Wheel strapping system. It might add some extra expense to the transporting mission, and really works largest for bikes which have their rear tire utterly uncovered and simply accessible, nonetheless this can be very setting pleasant. The strapping system eliminates fear about having the rear of the bike change spherical all by way of transport.

Lastly, make sure that each one strapped places are common and prepared for transport. Periodically, whereas in transport, double check out the straps to substantiate they proceed to be safe.

I hope this helps you profit from many miles of worry-free bike transport. Now take the bikes off the trailer and get in some two-wheeled pleasing!


For the Full TEAM Arizona Publication Content material materials supplies, CLICK HERE

Use delicate straps on the bike itself, then loop every of these to a ratchet strap. Compress your shocks only a bit, so the straps gained’t disengage inside the event you hit a bump all through the freeway. Select your anchor parts fastidiously; two on the doorway, two on the as soon as extra, one to a side. Don’t go away any slack all through the straps.

What measurement ratchet straps for bike?

Strap Measurement: The strap should be extended ample to bridge the realm between part of the bike and the trailer. Additional measurement could possibly be usually required to have ample for securing the strap by way of rigidity. Most straps are two to eight ft in measurement, nonetheless longer verions are furthermore accessible for bigger trailers.

What’s the largest bike wheel chock?

10 Greatest Bike Wheel Chock Evaluations Excessive Max 5001.5010 Customary Bike Wheel Chock. MaxxHaul 70075 Bike Wheel Chock. Condor SC-2000 Trailer-Solely Chock. MaxxHaul 70271 Adjustable Bike Wheel Chock. Dragway Units 1500lbs Mounted Bike Entrance Wheel Chock. GoPlus Adjustable Bike Wheel Chock Stand.

Can a bike trailer be pulled by a automotive?

Whereas mini campers are most incessantly marketed as bike campers, they’re usually towed by any vehicle, a tiny Smart Automobile, a three-wheel Spyder, or possibly a mid-size bike. Meaning any compact or full measurement automotive or truck can tow a small pop up camper.

How do you load a bike on a truck?

How To Transport a Bike In a Pickup Truck Measure the truck mattress and your bike for compatibility. Uncover an incline. Get your ramp put together. Set your wheel chock (optionally obtainable) Load the bike. Protected bike in truck mattress. Research the load. Unload your bike.

How can I transport my bike and by no means using a truck?

Trailer. A reasonably simple decision to change your bike with out the utilization of a truck is by loading it correct proper right into a small trailer. There are devoted bike trailers that attribute built-in ramps, tie downs, even built-in wheel chocks, nonetheless even principally basically essentially the most main trailer will work with the appropriate tie-down parts.

Do U-Haul vans have ground tie downs?

All U-Haul vans are lined with rub rails on three partitions, together with the doorway of the van physique. You gained’t uncover any entrance wall rub rails all through the rivals’s vans! Our rub rails permit prospects to tie down their belongings securely to forestall them from shifting in the midst of the journey.

Is it accepted to tow a bike with a automotive?

I do appear to do not forget that there’s a most distance between autos, and that one could not tow a bike behind a automotive, nonetheless that towing a bike with one totally different bike, or towing a automotive with a bike, is OK. One issue about lights have to be displayed on the towed vehicle in hostile circumstances.

Would you want a wheel chock to maneuver a bike?

Nonetheless tying down a bike with out utilizing a wheel chock leaves the possibility of the doorway wheel turning and your complete bike shifting whereas being transported. So, within the occasion you wish to transport your bike as safely as doable, it’s largest to make the most of a wheel chock to safe the wheels all by way of your journey.

How do you tie down two bikes on a trailer?

Bike two entrance wheel into the left entrance nook and tied entrance coronary heart and entrance left. Bike three goes in backwards between them and ties to the center. Take care they don’t rub and harm one another. The extra ties the higher entrance and rear, pad between them if essential.

What are the simplest tie down straps for bikes?

10 Greatest Bike Tie Down Straps: AUGO Ratchet Tie Down Straps. RHINO USA Tender Loop Bike Tie Down Straps. AUGO Tender Loop Tie Down Straps. RHINO USA Bike Tie Down Straps. Sunferno Ratchet Straps Tie Down. FORTEM Ratchet Tie Down Straps. RHINO USA Ratchet Straps Heavy Obligation Tie Down Set.

Can I transport a bike in a U-Haul?

U-Haul includes a trailer notably designed for transporting bikes, nonetheless it is merely accessible for leases that can probably be returned to the distinctive rental facility. If going one-way, U-Haul recommends renting the 5×9 open ramp trailer which can very nicely be left at any U-Haul vendor or Rental Coronary coronary heart.

Are there tie downs in a U-Haul trailer?

All cargo trailer leases have a fragile journey, rub rails, quite a few tie-downs and lockable doorways to guard your belongings. We put security first, so all trailer prospects are urged to load the trailer heavier in entrance, drive slower than you typically would, and please, at all times put in your seatbelt.

What does a bike wheel chock do?

A motorcycle wheel chock is used when storing or transporting a bike to maintain up the doorway wheel from turning and thus the bike from tipping over. Wheel chocks could be discovered quite a few styles and sizes to make sure your tire suits tightly and your bike stays secure.

The place do you place wheel chocks?

Frequently use wheel chocks in pairs. Wheel chocks have to be positioned downhill and beneath the auto’s coronary coronary heart of gravity. On a downhill grade, place the chocks in entrance of the doorway wheels. On an uphill grade, place the chocks behind the rear wheels.

Will a bike slot in a brief mattress truck?

A truck mattress gained’t match a suggest grownup filth bike, even diagonally, in addition to the mattress of the truck is a minimal of 5 and a half ft extended. Even then, it will ONLY match diagonally. Placing your bike diagonally into the mattress of your truck goes to be your largest guess for becoming your bike right into a day by day transient mattress.

What’s a bike choke?

A choke valve/cable is designed to limit the movement of air all through the carburettor of an engine. This helps enrich the fuel-air combination, bettering the flexibleness to start out an engine in low temperature circumstances. Merely put, the choke is about making extra gasoline accessible for the engine to make the most of.

Can a bike match all through the mattress of a Tacoma?

Most filth bikes which can be beneath 250 cc will match all through the transient mattress of a Toyota Tacoma, being at a measurement beneath 5 and a half ft for the filth bike. Grime bikes which can be 450cc are, on widespread, seven ft extended, which is a foot longer than the mattress of this truck.

Up to date: September 10, 2021

Revealed: August 27, 2021

To keep away from harm to your bike when transporting it on an open trailer, it’s essential to tie it down precisely. The final merchandise you need is in your bike to slip spherical all through the as soon as extra, getting scratched up and turning proper into a security hazard.

Is A Wheel Chock Your Greatest Guess?

How do you tie down a motorcycle with a wheel chock

The commonest decision to tie down a bike is utilizing a wheel chock. These are metallic wedges designed to carry the wheel of your bike and help its weight so it doesn’t shift or fall over when the auto makes sharp turns or goes over bumps.

Nonetheless contemplating its measurement, a chock will not be relevant for trailers with restricted dwelling. A low-cost trailer wouldn’t typically embody it, so you will have to purchase them individually. Furthermore, not all varieties of motorbike wheels can at all times match a wheel chock.

In most circumstances, it is essential to be utilizing wheel chocks.

Nonetheless there are totally different strategies to tie down a bike and by no means using a chock the place you don’t have that threat.

Alternate decisions to a Wheel Chock

The principle goal why of us use a wheel chock is that it holds their tires firmly in place. So while you’re selecting an alternate, it should be merely as sturdy to cease the wheels from turning. A chunk of plastic, metallic, picket, or possibly a pair of bricks can all be good alternatives.

If the underside of your trailer is wood, you can even lower a sheet of three/Four inch OSB to the width of the trailer, put some holes in them for the tie-down, and bolt devices of 2X4s with deck screws.

Relying on the dimensions and weight of your bike, you will want to improvise with these gives to make sure they seem to be a fantastic match for the tire. You may even throw in a towel or two to behave as an added help wedge. As rapidly as a result of the wheel is completely secured, it’s time to tie the bike down.

The Do’s and Don’ts of Tying Down A Bike

How do you tie down a motorcycle with a wheel chock

Everytime you’re not cautious, the easy act of tying down a bike to a trailer could very nicely be a exact hassle.

It’s essential to do it appropriate to keep away from accidents and unwarranted damages. So, listed beneath are some dos and don’ts of tying a motorcycle on a trailer and by no means using a wheel chock:

The Dos:

  1. It is crucial that you just merely use a wonderful high quality ratchet strap on account of it will make it less complicated to lock the bike precisely and defend it common from all sides. Low worth straps can break off shortly, inflicting your bike to wobble spherical.
  2. Wrap the ratchet straps with delicate loops to forestall the hooks of the ratchet from leaving scratches in your bike. In case you might need fixtures on the underside of the trailer, it is worthwhile to make use of them to tie the delicate loops as correctly.
  3. Strap the bike down on two parts on the doorway and rear wheels. All through the doorway, it is worthwhile to make use of the doorway forks of the bike for the tie down.
  4. As an added safety in your bike, ponder defending it with blankets to forestall scratches and potential harm from the fabric you make the most of.
  5. Though the possibilities are very slim, you most likely can defend the bike in gear to have the flexibility to decrease the harm that may happen if there’s a strap failure or if it disengages out of your self-made chock.

The Don’ts:

  1. Don’t compress the suspension of the doorway wheel an excessive amount of. Solely do it partially for the doorway and barely a lot much less for the rear This may increasingly more and more stop the bike from bouncing and loosening the straps when driving on a bumpy freeway.
  2. Keep away from strapping the handlebars as doing so can compress the bushings or bend the washers, inflicting the bars to loosen.
  3. Don’t throw the straps over your bike’s seat or your saddlebags as you’ll positioned on them down and go away marks.
  4. In case you might need spare provides or slack from the strap, don’t go away it flapping spherical. As a substitute, tie it down securely to your trailer.
  5. Don’t neglect to cease and do a load check out each 25 to 30 miles to make sure all the points is in place, notably In case you might need an extended journey forward.


Basically essentially the most secure decision to maneuver your bike on a trailer is through the utilization of a bike chock. Nonetheless inside the event you don’t have an correct one, that it is important to make sure that you just’re utilizing an acceptable completely totally different and investing in high-quality ratchet straps to cinch the bike tightly to the physique in order that it doesn’t change in the slightest degree all by way of transportation.

Picture credit score rating ranking: Cjp24, CC BY-SA 4.0, via Wikimedia Commons

How do you tie down a motorcycle with a wheel chock

Must you wish to transport your bike with out driving it, then one in every of many best strategies to take movement entails hauling it collectively alongside along with your trailer or truck.

Nonetheless as a substitute of dumping all through the trunk ordinarily, you’ll ought to tie it down exactly to make sure it stays in place. This may increasingly more and more assist stop it from shifting or tipping over and even falling out of the trailer all by way of transit.

On this submit, you’ll uncover easy methods to exactly strap down your bike in your truck or trailer for easy and secure transportation to your designation.

Desk of Contents

What You’ll Want:

For this operation to achieve success, you’ll want only a few devices by your side. These embrace:

How To Tie Down A Bike:

Assuming you may want already gathered all the vital devices we’ve got now now listed above, let’s get correct all the best way all the way down to enterprise on easy methods to strap down a bike in your truck or trailer.

How do you tie down a motorcycle with a wheel chock

1. Put the wheel chock into place

We now have now merely talked about above that you just merely’ll want a motorcycle entrance wheel chock to assist safe the doorway wheel of your bike and stop ahead movement all by way of transit.

The very very very first thing it is best to do is ready up the wheel chock in place in your truck or trailer—you merely place it behind the truck mattress, on the heart.

Some trailers embody pre-drilled holes to imply you may merely bolt down your wheel chock.

Everytime you don’t have to completely screw the chock to your truck, ponder securing it with the useful ratchet straps.

2. Format the straps in your truck

Subsequent, you’ll ought to development the straps in your truck. This entails attaching them to your trailer or truck anchor parts after which laying them stretched to the center, the place your bike will stand.

How do you tie down a motorcycle with a wheel chock

Be part of two straps to the doorway of your truck and two straps to the rear. And make sure that the slack you allow on the truck ground can merely attain the bike while you load it for easy strapping.

What if my trailer or truck doesn’t have pre-made tie-down hooks? On this case, you most likely can tie your straps to the truck sidebars

Be acutely aware, although, that there was an ongoing debate on whether or not or not or to not carry out this step earlier than or after loading the bike.

In our opinion, doing it earlier than loading your bike will make your work simpler, plus it helps decrease the possibility of unintentionally flattening your bike.

3. Load your bike into truck/trailer

At this diploma, it is best to load your bike into the trailer/truck with the assistance of the bike ramp.

Two pairs of arms will make the tactic of loading the bike into the trailer simpler correct proper right here, with one explicit particular person holding each aspect—notably for inexperienced people.

4. Protected the bike entrance wheel

As rapidly as a result of the bike is contained inside the trailer, safe the doorway wheel into the wheel chock. Most chocks come designed in such a vogue that their mechanism clicks when the doorway wheel is ideally into place.

How do you tie down a motorcycle with a wheel chock

Everytime you had put down the kickstand while you loaded the bike into your truck, guarantee to increase it earlier than you begin tying down your bike all through the following step…

5. Strap down your bike

Alongside alongside along with your bike standing in an upright place, it’s time to start out strapping down the doorway and rear elements of your bike, as outlined beneath…

(i). Tying the doorway half:

It is best to begin by tying down the doorway a part of your bike (and keep in mind that that is principally basically essentially the most important a part of strapping down the bike). To do it exactly, be a part of the doorway straps to the decrease triple timber of your bike—i.e., the half connecting the doorway forks collectively, linking them to the bike physique.

Consultants bikers CAUTION you within the path of tying the doorway straps in your bike handlebars as this can probably harm your bike.

(ii). Tying down the rear:

Most individuals are solely desirous about strapping down the doorway half, which is completely okay.

Everytime you’re skeptical that the doorway tie-downs aren’t enough, nonetheless, you most likely can go forward and tie the rear a part of your bike to the trailer.

On this case, we advocate you to tie the straps to your bike physique or swing-arm for max safety. And whereas doing so, take care to not harm delicate elements of your bike such on account of the brake traces.

Some specialists furthermore counsel that you may presumably loop the straps by way of the tires and wheels to make your bike somewhat safer.

6. Affirm you may want accomplished an beautiful job

Prior to you get behind the wheel and begin transporting your bike, do one remaining check out to make sure it’s precisely tied down.

Begin by checking that each one the straps used have EVEN rigidity; that is essential in ensuring the bike stays safe till you attain your journey spot.

Furthermore, check out that each one the ratchets are exactly closed, and the ties are correctly secured.

Affirm that the kickstand is raised, and all the surplus straps are safely tied up.

PRO TIP: Seize the bike handlebars and trying shaking your bike. The bike ought to act as a part of your bike as if it’s welded to your bike ground. Everytime you uncover any play all through the straps when doing this take a look at, you then’ll ought to redo the stress.

Remaining Verdict

After studying this information, strapping down your bike to a trailer or truck for transport should basically actually really feel simpler, even inside the event you’re doing it for the primary time. Merely guarantee you may want the right devices and observe the above steps to safe your bike for secure transportation to your journey spot.

Making any errors may inflict pricey damages within the one you like bike. So, be sure to carry out a remaining check out on whether or not or not or not you may want exactly tied down your bike earlier than you hit the freeway.